If you drive a 2017 Jeep Grand Cherokee, keeping your cabin air filter clean is key to breathing fresh air inside your vehicle. You might not realize it, but a dirty filter can reduce air flow and make your car’s air conditioning less effective.
Changing the cabin air filter yourself is easier than you think, and it saves you time and money. In this guide, you’ll learn simple, step-by-step instructions to replace your cabin air filter quickly. By the end, you’ll know exactly how to improve your driving comfort and keep your Jeep’s interior air fresh.
Ready to get started? Let’s dive in.
Tools Needed
Changing the cabin air filter in a 2017 Jeep Grand Cherokee is a simple task. You only need a few basic tools to do the job.
Having the right tools ready helps you finish the job faster and without damage.
Screwdriver
A screwdriver is needed to remove the screws holding the glove box or cabin filter cover. Usually, a Phillips head screwdriver works best.
Make sure the screwdriver fits the screws to avoid stripping them.
Flashlight
A flashlight helps you see inside dark areas behind the glove box. It makes it easier to locate the filter and any clips or screws.
Using a flashlight reduces the chance of missing small parts or damaging components.
Gloves
Wearing gloves keeps your hands clean from dust and debris. It also protects your skin from any sharp edges inside the glove box area.
Use disposable or work gloves for a better grip and hygiene.
New Cabin Air Filter
Have the correct replacement cabin air filter ready before you start. Check your vehicle’s manual for the exact filter model.
Using the right filter ensures proper fit and clean air inside your Jeep.
Locating The Cabin Air Filter
The cabin air filter in a 2017 Jeep Grand Cherokee cleans the air inside the vehicle. It traps dust, pollen, and other particles. Knowing where to find it helps you replace it easily.
This guide shows you how to locate the cabin air filter quickly. Finding it is the first step before you can change it.
Location Inside The Vehicle
The cabin air filter is behind the glove compartment. You need to open the glove box to see the filter cover. It is not under the hood or near the engine.
Accessing The Glove Compartment
To access the cabin air filter, first empty the glove compartment. Then, gently press the sides to release the stops. This lets the glove box drop down fully.
- Remove all items from the glove box.
- Push the glove box sides inward.
- Let the glove box drop down completely.
- Look behind the glove box for the filter cover.
Identifying The Filter Cover
The filter cover is a rectangular plastic panel. It usually has clips or tabs to hold it in place. You can open it without tools in most cases.
| Part | Description |
| Filter Cover | Rectangular plastic panel behind glove box |
| Clips or Tabs | Hold the cover securely |
| Cabin Air Filter | Located inside the cover, filters cabin air |
Removing The Old Filter
The cabin air filter in a 2017 Jeep Grand Cherokee cleans the air inside your vehicle. Removing the old filter is important before installing a new one. This guide helps you take out the used filter safely and quickly.
Make sure your vehicle is parked and the engine is off. You will work behind the glove box to access the filter compartment.
Open The Glove Box
First, empty the glove box of all contents. Then, gently squeeze the sides of the glove box inward to release the stops. This allows the glove box to swing down fully and expose the filter cover behind it.
Remove The Filter Cover
Locate the rectangular filter cover behind the glove box. Press the tabs on both sides of the cover and pull it straight out. Keep the cover safe as you will need it to close the compartment later.
Take Out The Old Cabin Air Filter
Grasp the edges of the old filter and carefully slide it out of the housing. Avoid shaking it to prevent dust from spreading. Check the filter for dirt and debris to confirm it needs replacement.
- Empty glove box contents and squeeze sides to open fully.
- Press and remove the filter cover by its tabs.
- Pull out the old cabin air filter carefully.
Cleaning The Filter Housing
Cleaning the filter housing in your 2017 Jeep Grand Cherokee is important. It helps keep the air inside your vehicle fresh. Dirt and debris can build up in the housing over time.
Removing this dirt prevents it from clogging the new cabin air filter. It also stops bad smells and improves air flow inside the car.
Locate The Filter Housing
The filter housing is behind the glove box. Open the glove box and remove any contents. Then, gently lower the glove box to access the housing.
Remove Debris And Dust
Use a clean cloth or a vacuum cleaner to remove dust and debris inside the housing. Be careful not to damage the housing or any clips.
- Vacuum loose dirt and leaves
- Wipe the surfaces with a damp cloth
- Check for any stuck debris and remove it gently
Inspect The Housing Seal
Check the rubber seal around the housing opening. A good seal keeps dust from entering the cabin. If the seal is cracked or damaged, replace it before installing the new filter.
Reassemble The Glove Box
After cleaning, carefully close the filter housing cover. Lift the glove box back into place and secure it. Make sure it opens and closes smoothly.
| Cleaning Tool | Purpose |
| Vacuum Cleaner | Remove loose dirt and leaves |
| Damp Cloth | Wipe surfaces clean |
| New Seal (if needed) | Replace damaged rubber seal |
Installing The New Filter
After removing the old cabin air filter from your 2017 Jeep Grand Cherokee, it is time to install the new one. Installing the new filter correctly ensures clean air inside your vehicle.
Take care to place the filter in the right direction. This helps the filter work as it should and keeps the air fresh.
Check Filter Orientation
Look for arrows on the new cabin air filter. These arrows show the direction of airflow. The arrows must point the same way as the airflow in your car’s system.
Insert The Filter Carefully
Place the filter inside the cabin filter slot gently. Avoid bending or damaging the filter. Make sure the filter fits snugly and sits flat in the slot.
Secure The Filter Cover
Once the new filter is in place, close the filter compartment cover. Push it firmly until you hear it click or it feels secure.
- Check that the cover is aligned correctly
- Do not force the cover if it does not close easily
- Inspect the area for any leftover debris before closing
Test The Airflow
Turn on your vehicle’s air system. Feel the airflow from the vents. The air should move freely without blockage.
| Action | Tip |
|---|---|
| Check filter arrows | Make sure arrows point toward airflow |
| Insert filter | Place gently, avoid bending |
| Close cover | Secure firmly without forcing |
| Test airflow | Ensure air flows well from vents |
Testing The New Filter
After changing the cabin air filter in your 2017 Jeep Grand Cherokee, testing it is important. This ensures clean air flows inside the vehicle.
Testing helps confirm the filter is installed correctly and works well. It keeps dust and pollen out of the cabin.
Check Airflow From Vents
Turn on the air conditioner or heater. Feel the air coming from all vents inside the car.
The air should blow strong and steady. Weak airflow might mean the filter is blocked or not fitted properly.
Smell The Air Quality
Fresh air should smell clean and neutral. A new filter removes odors and dust from the air.
If you notice strange or musty smells, check if the filter is installed the right way.
Listen For Unusual Noises
Turn on the blower fan and listen carefully. The sound should be smooth and quiet.
Rattling or whistling noises might mean the filter is loose or damaged.
Inspect The Filter Fit
Open the filter compartment to check the new filter’s position. It should fit snugly without gaps.
- Look for loose edges or folds
- Make sure the filter matches the compartment size
- Replace if damaged or incorrectly placed
Monitor Cabin Air Quality Over Time
Watch for dust buildup or bad smells inside your Jeep after driving for a few days.
If problems return soon, the filter may be low quality or need replacing again.
Maintenance Tips
Changing the cabin air filter in your 2017 Jeep Grand Cherokee keeps the air inside clean. This helps improve air quality and keeps the HVAC system working well.
Regular maintenance of the cabin air filter protects you from dust, pollen, and other pollutants while driving. It also helps prevent bad odors and foggy windows.
Locate The Cabin Air Filter
The cabin air filter is behind the glove box in the 2017 Jeep Grand Cherokee. You need to open the glove box and remove some parts to access it.
Knowing the filter’s location makes the replacement process faster and easier. Keep your owner’s manual handy for help if needed.
Remove The Old Filter Carefully
After opening the glove box, gently pull out the old cabin air filter. Avoid shaking it to stop dust from spreading inside the car.
Check the filter for dirt and debris. A very dirty filter means you should change it more often next time.
Install The New Cabin Air Filter
Make sure the new filter fits the slot properly. Follow the arrows on the filter for the right airflow direction.
Push the filter gently into place. Close the glove box securely after installation.
Check And Replace Regularly
Replace the cabin air filter every 12,000 to 15,000 miles or once a year. Check it more often if you drive in dusty areas.
- Inspect the filter every 6 months
- Replace if you see dirt or damage
- Keep a spare filter handy for quick changes
Benefits Of Changing The Filter
A clean cabin air filter improves air flow inside your Jeep. It helps your air conditioner and heater work better and last longer.
It also protects passengers from allergens and dust, making every trip more comfortable and safe.
Frequently Asked Questions
How Often To Change Cabin Air Filter In 2017 Jeep Grand Cherokee?
For optimal performance, replace the cabin air filter every 12,000 to 15,000 miles. Frequent replacement ensures clean air and reduces allergens in your vehicle. Check your owner’s manual for specific intervals based on driving conditions. Regular maintenance enhances air quality and prolongs HVAC system life.
Where Is The Cabin Air Filter Located In Jeep Grand Cherokee?
The cabin air filter is located behind the glove box in the 2017 Jeep Grand Cherokee. To access it, open the glove box and remove the retaining tabs. This straightforward location allows for easy replacement, ensuring the interior air remains clean and fresh.
What Tools Needed To Replace Cabin Air Filter?
Replacing the cabin air filter requires minimal tools, often just a screwdriver. The process is straightforward, involving removing the glove box and filter cover. Having a flashlight might help for visibility. This simplicity makes it a manageable task for most vehicle owners.
Can I Change Cabin Air Filter Myself?
Yes, you can change the cabin air filter yourself. It’s a simple DIY task requiring basic tools. Follow step-by-step instructions and ensure the new filter is correctly positioned. Doing it yourself saves money and ensures your Jeep’s air system remains efficient and clean.
Conclusion
Changing the cabin air filter in your 2017 Jeep Grand Cherokee keeps the air clean. It helps reduce dust, pollen, and bad smells inside the car. The process is simple and takes only a few minutes. Regular changes improve your comfort and protect the vehicle’s HVAC system.
Remember to check the filter every year or after 12,000 miles. Clean air makes every drive better. Easy to do and worth the effort. Give your Jeep fresh air today.
Table of Contents
Leave a Reply
Your email address will not be published.