Although it is necessary to tighten our bike brakes routinely for safety, we dare not to do that. Most often, it happens for not having the proper guidelines. We already know that how important to adjust the brakes regularly because looser one may occur any unwanted accidents. So, if you want the outstanding performances from your brakes, you need to know how to tighten bike brakes in the first place.

What Types of Tools will you Need?

As it is an effortless yet essential job, all you need usual tools like screwdriver and wrench. You can wear gloves for safety purposes.

What is the Entire Procedure to How to Tighten Bike Brakes?

Step 1- Testing the Brakes

Test the tightness of the cable by pulling each brake level. Try to make an idea of how far the lever is from the handle and how much you will need to tighten the screw. If you find the lever is touching the grip, then the cables are loose.

Step 2- Adjusting Caliper

It will take just a few moments to work on. Use a wrench to loosen the bolt of the brake lever. After rotating the bolt for 4 to 5 times, the cable will get loosen and be easier to pull. Don’t unscrew the bolt all the way.

Step 3- Tightening the Cable

It is the most crucial step of the entire procedure. You need to keep pulling the cable outward until it is tight enough to tighten on the caliper. After tightening the cable properly, you will find the brake pads holding on the rim. Try to hold the cable tightly with your one hand and pull the brake’s caliper with your other hand. For tightening the brake’s caliper, use the Allen wrench or screwdriver clockwise about 5 to 6 times. Then tighten the loose barrel adjuster as well.

Step 4- Rechecking the Brakes

With this final step, you will be done with your brake fixing job. You need to test the brake cables again by pulling the brake levers. Make sure that when you pull them, there should be one and half-inch space between the lever and grip.

What are the Tips You Should Follow?

  • Make sure that you have closed the quick release before tightening your brakes.
  • Always check that the wheels are in the frame properly.
  • If you feel your brake pads are worn, you need to replace them.

Conclusion

And this is the end of the instructions, which are very easy to apply. Having a loose brake is very dangerous. So, to get rid of this severe issue, you can easily follow those given guidelines to fix up. So, how to tighten bike brakes is a no-brainer. All you need is the tools of the appropriate size to make your work easy and fast.

 

Read More:

Swagtron T3 Review : What You Should Need To Know

How to Clean Mountain Bike Brake Pads

Wiggle Car Reviews – Best Ride On Toys For Kids 3 Years & Up