Hanging a skateboard on the wall is an excellent way to show off your favorite board and add some unique style to any room. Whether you’re an avid skater or just want something cool to look at, displaying your ride can be both fun and practical. Having it up on the wall also helps keep it safe from dings, scratches, and other damage that comes with regular transport and use.

With a few basic tools and supplies, hanging a skateboard is easy enough for anyone to do in just minutes.

  • Gather the materials needed: Skateboard, wall anchors and screws, screwdriver or drill
  • Measure the skateboard you want to hang on the wall and mark its center point on the wall with a pencil
  • Drill holes into your marked points using a masonry bit if drilling into concrete walls, or regular drill bit for other surfaces such as drywall
  • Insert appropriate size of anchor screws into drilled holes and secure them in place by hammering them gently until they fit snugly in their respective holes
  • Place pre-drilled skateboard onto wall so that it is positioned correctly according to markings made earlier; then use screwdriver/drill to attach it securely by driving in screws all around perimeter of board until firmly fixed in place against the wall’s surface

DIY-How To Wall Mount A Skateboard

How Do You Hang a Skateboard Without Damaging the Walls?

Hanging a skateboard without damaging your walls can be a tricky task, but with the right steps and tools, it’s definitely possible. Here are some simple tips to help you hang your skateboard safely and securely:

1. Choose the Right Hooks:

It’s important to use hooks that won’t damage your walls or scratch the board when hanging it up.

Look for soft rubber or plastic-coated hooks that won’t leave marks on either surface. Pay attention to weight limits too – make sure the hook is strong enough for your board’s weight!

2. Find Studs in Your Walls:

To ensure maximum stability, it’s best to mount hooks into wall studs rather than just drywall alone.

Using an electronic stud finder will make this step easier; if you don’t have one handy, look for picture frames or other objects mounted directly onto studs as clues of where they may be located in your wall space.

3. Use Mounting Hardware & Wall Anchors:

Once you’ve found the correct spot on your wall for mounting the skateboard, use appropriate hardware such as screws and anchors that match its weight capacity (generally 2-4x). This will give added support so there’s no risk of boards slipping off their mountings over time due to wear and tear from heavy usage!

4. Consider Hanging Alternatives :

If drilling isn’t an option (or simply not desirable), there are alternative options available like adhesive-backed hangers which attach directly onto smooth surfaces like doors or windowsills without any damage at all – perfect if you’re renting or looking for a temporary solution!

You could also opt for freestanding stands made specifically designed with skaters in mind – these come in many designs ranging from basic racks to creative displays featuring wheels lights etc., adding extra style points while keeping floorspace free at home too! With these few easy steps , anyone should be able to hang their skateboard safely and securely without worrying about causing any unnecessary damage .

Whether you choose traditional screw-in mounts , adhesives , freestanding stands – whatever works best for you !

How Do You Hang a Skateboard on the Wall With Command Strips?

Skateboarding is a fun and popular activity, but when it’s time to store your skateboard, you need to be sure that it won’t take up too much space. Hanging your skateboard on the wall with Command Strips is a great way to do this – and it only takes a few minutes! Here’s how:

1. Gather Your Supplies: You will need several Command Strips (either large or small), some screws and anchors of the appropriate size for your wall type, as well as a drill and screwdriver. Note that if you have drywall instead of plaster or wood paneling walls, you may need special anchors for heavier items like skateboards.

2. Choose Your Spot: Find an area on the wall where you can hang the board securely – usually near eye level is best but make sure there are no obstructions in front of it such as shelves or furniture which could interfere with its use/accessibility later on down the line.

Additionally ensure there are no wires or pipes behind the spot where you plan to hang your board so that they don’t get damaged while drilling into them!

3. Pre-Drill & Install Anchors: With either an electric drill bit set specifically designed for metal surfaces (if applicable) OR an ordinary masonry bit set depending on what type of wall material is present in your home – pre-drill two holes through both sides of each anchor at least 1/4 inches deep before hammering them into place about 8 inches apart from one another horizontally along whatever surface was chosen previously in Step 2 above – taking care not to damage any underlying wiring/piping etc. whilst doing so…

This should create four total points from which command strips (see below) will attach themselves securely onto once applied correctly afterward!

4. Apply Command Strips & Hang Skateboard : Following instructions provided by manufacturer carefully; peel off backing paper from each command strip & press firmly against all four points created within Step 3 before attaching them directly onto corresponding spots where anchors were installed previously too… Then simply slide skateboard deck between command strips until secure – ensuring that tail end clears top edge by few millimeters otherwise risk damaging paint job over time due heavy weight being placed upon bottom portion during riding sessions etc afterwards!

How Do You Hang a Skateboard Like a Shelf?

Hanging your skateboard like a shelf can be an easy and stylish way to display your board while freeing up some space in the process. With just a couple of easily obtainable items and some simple steps, you can have your skateboard hung on the wall in no time. Here’s how:

Step 1: Gather Your Materials. You’ll need two sturdy screws that are long enough to go through both sections of wood (deck and tail) without sticking out on either side, as well as two matching washers for each screw. Additionally, you will need four metal brackets or “L” brackets with holes pre-drilled into them that fit the size of your screws.

Step 2: Attach The Brackets To The Wall. Measure where you want to hang the skateboard and mark it on the wall with a pencil or marker so that you know where to attach the brackets once they arrive at home. Next, use an electric drill (or hammer/nails if needed) to attach two metal “L” brackets onto the marked area near each end of the board – this is what will hold it up against the wall when finished!

Be sure not to over tighten; otherwise, there is a risk of damaging either bracket or screw hole which may cause them not work properly later down road!

Step 3: Pre-Drill Holes In Deck And Tail Of Skateboard For Screws And Washers To Go Through Securely Once Hung On Wall. Now measure exactly where you want these holes drilled so everything lines up perfectly along both sides—the deck section should match up with one bracket while its corresponding tail section aligns itself opposite from other bracket across from first one installed earlier!

Use small drill bit appropriate size screws being used here before inserting any hardware though since larger diameter bits could potentially damage underlying material underneath surface layer boards making mounting even more difficult than necessary later down line if done wrong now!

This step also ensures threads catch correctly once assembled finally too (especially important when using softer woods such as maple). Make sure all measurements taken during drilling process are accurate before continuing next step because mistakes made here cannot be undone afterwards – take extra care here make sure things look right before moving ahead!

How to Hang Skateboard on Wall

Credit: makefuncreating.com

Hang Skateboard on Wall Horizontally

Hanging your skateboard on the wall horizontally is a great way to show off your board and save space. Not only does it look cool, but it also keeps your board safe from damage that can occur when left on the ground or in an overcrowded closet. Plus, you won’t have to worry about where to store it when you’re not using it.

But how do you hang a skateboard horizontally? Here are some tips for doing so:

1) First, choose a wall stud or secure location: Before hanging up your skateboard, make sure that whatever part of the wall that you’re attaching it to is strong enough to hold its weight.

Install screws into drywall anchors or wooden studs if possible — this will ensure that everything stays put once installed and doesn’t come crashing down at any point!

2) Measure twice before drilling: Once you’ve chosen the spot for mounting the board onto the wall, measure twice with a tape measure before drilling any holes. This will ensure accuracy and prevent any mistakes down the road — plus, it’ll be easier than patching up holes later on!

3) Use appropriate hardware: Make sure you use proper hardware like bolts and washers when installing your skateboard onto the wall. Depending on which kind of surface material (wooden boards need different kinds of screws than drywall anchors), determine what type of screw/bolt combination would work best for securing everything together tightly yet safely without damaging anything else around them unnecessarily — such as walls or furniture nearby).

4) Hang vertically instead of horizontally: When placing your screws in order to hang up your board vertically rather than horizontally – this allows each individual wheel’s axle hole-to-be covered by one single bolt head (rather than two separate ones).

This will help keep all four wheels securely attached while also making installation much easier overall since there’s no worrying about making sure each side has equal balance – just line ’em up straight along with having even spacing between each individual wheel! Overall, following these simple steps should make hanging up a skateboard easy peasy lemon squeezy! And don’t forget – safety first; always double check measurements before drilling anything into walls and remember use proper hardware accordingly based upon surface material being used too!

How to Hang Skateboard on Wall Without Nails

If you’re looking for a way to hang your skateboard on the wall without having to use nails, look no further! There are actually several creative and easy ways that you can get your board up in style – no tools needed. One of the simplest methods is to use adhesive hooks.

These small, adhesive-backed plastic anchors come with pre-drilled holes that make hanging items as simple as peeling off the backing and pressing them into place. You’ll want to choose a size appropriate for the weight of your skateboard – typically anywhere from 3 pounds all the way up to 25 pounds or more depending on what type of board you have. Once secure, simply hang your skateboard by its trucks (the metal part where your wheels attach).

Another option would be using bungee cords or elastic straps, which will give you some extra flexibility in how far away from the wall you want it hung. To do this, all you need is two sturdy points somewhere near each other on either side of where you want it mounted; these could be screws installed into drywall anchors or even two large eyehooks screwed directly into studs if possible.

Then just thread one end of each cord through an opening at the base of each truck and loop it around whatever point is available before tying off securely so there’s enough tension for support but not too much so as not to damage anything when done properly this should provide plenty of stability while still letting it move slightly like if someone bumps against it – perfect for those who plan on displaying their board as well as riding it!

Finally, another great way requires nothing more than some strong fishing line or paracord – whichever works best with what kind material/structure you have available nearby that can bear some weight (for example: beams, rafters etc.).

All that needs doing here is drilling small holes through both sides’ trucks then passing a lengthwise piece through them before tying off tightly onto something secure above like mentioned previously – again making sure there’s enough tension but not too much so as not harm any parts whatsoever once finished!

This method offers pretty much unlimited customization depending upon how long/short lines are used along with other variables such as different knots being employed etcetera…

How to Hang Skateboard With Wheels on Wall

Skateboarding is a popular and fun form of recreation, but it can take up a lot of space in your home. To save on floor space, you may want to hang your skateboard with wheels on the wall. This guide will show you how to properly mount your skateboard so that it’s secure and looks great hanging in any room.

Materials Needed:

– Skateboard – 4 Drywall anchors (for plaster or drywall)

– 4 Screws (2 1/2 inches long) – Drill & Bits Instructions:

1. Start by determining where exactly you would like to hang the board on the wall. Make sure there are no studs behind where you plan to drill; otherwise, use an anchor for extra support when mounting the board onto the wall.

2. Measure from one end of your skateboard deck towards the other end and mark at least three evenly spaced points along its length – these marks will be used as drilling points for attaching screws into drywall or plaster walls later on.

3. Using a drill bit slightly smaller than the size of screw head being used, drill holes at each premarked point until they penetrate through both sides of plastered or drywalled surfaces respectively – this prevents screws from stripping out over time due to frequent vibrations caused by riding activities associated with skateboards .

4. Next up is inserting plastic anchors into each hole drilled earlier using either a power driver tool or manual screwdriver depending upon preference; once inserted fully into surface material they provide added stability while mounting boards onto walls .

5. Now insert two 2 ½ inch long screws per anchor making sure heads are flush against surface being mounted onto before tightening down completely; if necessary add washers for better grip if desired .

6 Finally attach board directly onto set of installed screws ensuring all four corners line up correctly before securely fastening nuts provided with purchase ; repeat process listed above twice more until all four corners have been attached together firmly – now sit back relax and enjoy newly hung skateboard which should remain securely mounted regardless how often used !


Are you looking for a way to display your skateboard collection in style? Hanging them up on the wall is a great option! In this blog post, we’ll show you how to hang a skateboard securely and safely.

First, make sure that the wall or surface you are attaching it to can support the weight of the board. You can use heavy-duty screws, anchors or nails to mount your board depending on what type of material it’s attached to. Make sure they’re driven into studs if available so they don’t come loose over time.

Next, get some sturdy hooks that will hold your boards without damaging them. There are lots of different types available online and at hardware stores. When choosing one, look for something with enough space between each hook so that each board fits comfortably without overlapping other boards in storage.

Once your hooks are secured onto the wall or surface, affix rubber bumpers onto each hook before placing your skateboards on them (or any other items like helmets). This will prevent any scratches or damage as well as absorb vibration from skating sessions nearby! Finally, all you need to do is attach hangers made specifically for skateboards onto each side of your deck and then hang away!

It’s important not only for aesthetic purposes but also safety reasons -if there isn’t enough clearance between two adjacent decks when hung up together then someone could get hurt if their foot gets stuck in between them while riding past! To sum it up: hanging up a skateboard securely requires proper planning – choose suitable materials such as heavy duty screws/anchors/nails; secure sturdy hooks; add protective rubber bumpers; and finally attach hangers made specifically for skateboards onto both sides of the deck before hanging away!